Call for one-time boot selection menu

Phoenix BIOS offers one-time boot selection menu by pressing F5 during boot. To make it work user has to make sure Windows Boot Manager is not blocking its operation - it depends if OS installed in Legacy or UEFI mode.

OS in Legacy mode:
1. On computer start clicking F5 will bring you into one-time boot selection menu


OS in UEFI mode:
1. Configure Windows Boot Manager to be the last boot order option

a. Enter BIOS menu:
i. If Windows 8 or Windows 10 enter the BIOS from the OS:
1. Do steps b, c, d below
ii. If Windows 7:
1. Remove the HDD/SSD storage
2. Boot the computer without it
3. Once shell appears type exit
4. You are in the menu. Click Tab and enter Setup
5. Do steps b, c, d below
6. Install the HDD/SSD
b. Go to boot order
c. Change Windows Boot Manager to be the last in sequence
d. Save and Exit

2. On computer start Clicking F5 will bring you into one-time boot selection menu


Does Intense PC support pfSense?

pfSense works well on Intense PC.